<p>Microfluidic structures for the generation of laminar fluid diffusion interfaces (LFDIs) for sample preparation and analysis are discussed. Experimental data and the results of fluid modeling are shown. LFDIs are generated when two or more streams flow in parallel in a single microfluidic structure without any mixing of the fluids other than by diffusion of particles across the diffusion interface. It has been shown that such structures can be used for diffusion-based separation and detection applications. The method has been applied to DNA desalting, the extraction of small proteins from whole blood samples, and the detection of various constituents in whole blood, among other examples. In this paper the design and manufacture of self-contained microfluidic cartridges for the extraction of small molecules from a mixture of small and large molecules by diffusion is demonstrated. The cards are operated without any external instrumentation, and use hydrostatic pressure as the driving force. The performance of the cartridges is illustrated by separating fluorescein from a mixture of fluorescein and dextran of molecular weight 2 x 10(6). In a single pass, 98.6% of dextran was retained in the product whereas 43.1% of fluorescein was removed. The method is adjustable for different separation requirements, and computational fluid dynamics (CFD) models are shown that demonstrate the tuning of various microfluidic parameters to optimize separation performance. Other applications of LFDIs for establishment of stable concentration gradients, and the exposure of chemical constituents or biological particles to these concentration gradients are shown qualitatively. Microfluidic chips have been designed for high-throughput screening applications that enable the uniform and controlled exposure of cells to lysing agents, thus enabling the differentiation of cells by their sensitivity to specific agents in an on-chip cytometer coupled directly to the lysing structure.</p>